| Poster |
Message |
 peep
 Moderator |
 Ilusad asjad
Kellele ei meeldiks ilusad asjad ?
Wilwood tõi äsja turule 4-gen F-body´le mõeldud pidurikomplekti:
http://www.c-zone.net/markm/wilwood/
Kahjuks mul enda pidurivalik juba tehtud aga kes tahab autole korralikke pidureid siis Wilwood on BAER´i, Brembo ja Movit´i kõrval üks tõsisemaid tegijaid.
Konkreetne komplekt maksab 1300 usd esimesed ja 800 usd tagumised. Arvan, et vanemadele autodele (3-gen,mustabg) on hinnad kübe odavamad. |
| 04.11.2001 at 11:03 |
|
Henc
|
 Ilusad asjad
Trumli-swap taha on küll asjalik, ehk paneb mötlemagi! Peep, oled mingi "order-page"-i ka leidnud?
|
| 05.11.2001 at 11:48 |
|
peep
Moderator |
Ilusad asjad
Asi väga värske, on ainult see postitus L.G. Motorsports´i poolt:
http://web.camaross.com/bb/Forum25/HTML/001446.html
Kui ostad osta esimesed, juhul kui mõöema jaoks raha ei taha kulutada. Tagumiste parendamine eriti midagi juurde ei anna, kuna 80% pidurdusjõust rakendub esiratastele.
[Edited by peep on 05.11.2001 at 12:38 GMT] |
| 05.11.2001 at 12:34 |
|
Henc
|
Ilusad asjad
Kui ostan, siis juba kogu ringi. Esimesed on seega pidurduse parandamiseks ja tagumisd välimuse parandamiseks kui silmas pidada ka C5 velgi.
Hind muidugi kröbe aga eks see pisik modida tahab tapmist! |
| 05.11.2001 at 14:37 |
|
peep
Moderator |
Ilusad asjad
Kaheosalisi kettaid teiste käest Sa nii odavalt ei saa ja 6 sil. sadulaid ei paku keegi. Natuke kallim aga Sulle kodusem alternatiiv on siin:
http://www.movit.de/home.htm
Tegemist on siis Porsche originaalpiduritega.
Esipidurite pakkumist pole neilt mõtet küsida - juba küsisin:
quote:
----- Original Message -----
From: "Jochen Baither"
To:
Sent: Monday, April 23, 2001 9:55 AM
Subject: AW: brakes for camaro
Thank you for your inquiry and your interest in our products.
We would like to offer you the following mov'it-brake systems for Camaro Z28
('96) :
Front axle; for 15/16" rims w/ min. 345 mm I.D.
2 x 4-piston-aluminium-caliper, 36/44 mm piston dia., red
2 x rotors, 304 x 32 mm vented and cast-in holes
1 x pad set for street use (62,5 cm2)
2 x custom adapters for a.m. calipers, CNC machined f/ highest grade steel
alloy
2 x custom brake bells for a.m. rotors, CNC machined f/ highest grade alu.
alloy
1 x custom stainless steel coated PTFE lines for front & rear
The price for this system is 3.899,- DM (plus 16% VAT) and costs for
delivering 200,- DM via German Post Economy (plus 16% VAT).
or alternative
Front axle; for 16/17" rims w/ min. 375 mm I.D.
2 x 4-piston-aluminium-monobloc-caliper, 36/44 mm piston dia., red
2 x rotors, 330 x 34 mm vented and cast-in holes
1 x pad set for street use (78,5 cm2)
2 x custom adapters for a.m. calipers, CNC machined f/ highest grade steel
alloy
1 x custom stainless steel coated PTFE lines for front & rear
The price for this system is 4.399,- DM (plus 16% VAT and costs for
delivering 200,- DM via German Post Economy (plus 16% VAT).
4-piston-aluminium calipers guarantee extreme braking force since they are
developed for heavy street cars, not light race cars.
The non sprung weight is reduced by using highest grade aluminum alloy.
A unique ventilation system with a surface nearly twice as big as a normal
disc guarantees fading free operation, also under extreme conditions on the
track or for heavy security cars.
Our brake kits offer highest quality with maximum braking force and highest
fading resistance.
The lifetime of the wear items is by far higher than any other product on
the market.
It is nearly impossible to bring these brakes to their limits. Absolute no
fading !
All items are produced on our modern in-house CNC working stations, using
highest grade steel or aluminum alloy, under water-ultra sound tested and
coated to prevent corrosion.
If you have further questions do not hesitate to contact us on Phone
+49(0)7062/936050 or Fax +49(0)7062/936051.
Best regards
Stoll automotive GmbH
Jochen Baither
[Edited by peep on 05.11.2001 at 14:52 GMT] |
| 05.11.2001 at 14:51 |
|
Henc
|
Ilusad asjad
brutaalne !!! |
| 05.11.2001 at 15:40 |
|
|
